Japanese Brand Isuz U Kv100 12 M 14m 16 M 18m 20m High Altitude Operation Platform Bucket Boom Lift Pickup Ladder Truck

Basic Info

Transmission Type	Manual
Drive Wheel	4x2
Condition	New
Description	Vehicle Platform Truck
Name	Aerial Lift Bucket Trucks
Max Working Height	12m
Product Name	Aerial Manlift Work Platform Truck
Chassis Brand	Isuz U
Wheelbase	3360mm
Transport Package	Nude
Specification	5998x2050x2850 mm
Trademark	CLW
Origin	China
HS Code	87059099
Production Capacity	100 Unit Per Month

Product Description

Japanese brand Isuz u KV100 12 m 14m 16 m 18m 20m high altitude operation platform bucket boom lift pickup ladder truck
Specifications

No:.	Item	Model and specifications
1	Vehicle brand	CLW aerial operating vehicle
2	Product number	CLW5040JGKJ5
3	Chassis model	JX1041TG25
4	Working height	14 metes
5	Main technical parameters of operation	The height of the platform from the ground≥12.3mMaximum operating range of the platform ≥ 8mOperating range at the maximum operating height of the platform≥2mOperating height at the maximum operating range of the platform≥9mMaximum working inclination angle of platform≥75°The working arm can be fully extended when working horizontally Rated load of working bucket 200kg
	Outrigger	Mode: Front V and H type, individually adjustableQuantity: 4Control: Individually adjustable or linked.Front leg lateral span: 3622mmInclination: 120°Lateral span of rear outrigger: 3700mm
	Hook	Optional hook, maximum lifting tonnage 1000kg
	Main operation	Operating position: turntable, remote control operation.Control form: ZYK bus control system, electric-hydraulic proportional control system to realize continuously variable
6	Hoarding and platform board	Stainless steel fence and anti-skid platform
7	Boom structure	Three-section -hexagon (14m) type working arm, synchronized telescopic
8	Slewing device	360° continuous rotation in both directions, 360° rotation of the hanging basket
9	Vehicle size	5998×2000×2900
10	Total mass	4495kg
11	Curb quality	4365kg
12	Wheelbase	3360mm
13	Chassis configurations	kv100 single-row cab, model QL1043BUHAY 130-horsepower diesel engine, with direction assist, 3360 wheelbase, 7.00R16 steel wire tires, five-speed gearbox, oil brake, air conditioning, and other national standards Preparation.
14	Upper assembly system:	The working height is 14 meters aerial operating vehicle adopts a telescopic straight arm structure, the operating arm is a 3-section telescopic type. The color of the upper part is engineering yellow according to the announcement. The whole vehicle has four hydraulic telescopic legs (up and down telescopic and horizontal telescopic), a total of eight cylinders, the legs are front V and rear H type, emergency pump, bucket belt 360 Degree rotation, wireless remote control, others are prepared according to factory standards.

The high altitude aerial work truck can be used for overhanging work, crossing certain obstacles or lifting at one place for multi-point operation; the platform has a large load capacity, which can be used for two or more people to work at the same time and can carry certain equipment; Good sex, convenient transfer site; beautiful appearance, suitable for indoor and outdoor work and storage. Applicable to a wide range of high-altitude operations such as stations, terminals, shopping malls, stadiums, residential properties, factories and mines.Trailer-type folding arm aerial work vehicle, easy to move, compact folding arm structure, adopting new high-quality steel, high strength, light weight, direct access to AC or starting with its own DC power supply, fast erection, worktable can be raised and It is ideal for aerial work equipment because it extends horizontally and can also be rotated to easily reach obstacles across the working position.There are control devices in the working bucket and the rotary seat, which can control the start/stop of the engine from a long distance, high speed/low speed, and use the electro-hydraulic proportional valve to control the movement of the arm. The smoothness is good, and the working arm can be 360° left and right continuously. Rotating, the link mechanism automatically maintains the level of the working slot. When the main pump fails, the emergency pump can be operated to lower the working slot, and it can be illuminate at night with heavy lighting. The legs of the car are separately separated and adjustable, and the vehicle can be leveled on the uneven road. The whole vehicle is easy to move and can be used for narrow lots and small streets. Products are widely used in electric power, street lighting, municipal, garden, communications, airports, repair (repair) ships, transportation, advertising, photography and other high-altitude operations. Exhibition
Folding boom aerial work truck.1. The worktable is designed with mechanical self-balance, which is used to keep the worktable in balance during operation. The large extension angle of the jib reaches 65 °, so that it can be adjusted to a good working position. (The measurement method of jib extension angle is different, and some manufacturers mark it as 90 °) 2. The upper and lower operating systems can complete various operations on the platform and turntable. 3. Night work light, the operation light can be installed on the operation platform according to the customer's working environment to make night work safer. 4. The outriggers can be adjusted independently. Each outrigger can be adjusted independently according to the working ground environment. Even if the ground is uneven, the whole vehicle can be adjusted to a stable state. 5. The outrigger adopts the front and rear H-shaped structure, with larger stress surface and higher stability; It can prevent the girder from deforming or breaking (note: if the front V and rear H models are used for the outriggers, the girder is likely to deform or break due to the head hanging upside down after a long time of use). 6. The four vertical outrigger cylinders and the upper arm, lower arm and lower arm cylinders are equipped with two-way hydraulic locks, whose function is to lock the cylinder after reaching the required position to prevent accidents. The working arm is equipped with a two-way balance valve to make the operation of the working arm more stable. Telescopic boom aerial working truck.1. The aerial work vehicle adopts a telescopic straight arm structure. The operating arm is a four-section telescopic type. The turntable can be operated, and can also be operated by a remote control. It can rotate 360 degrees. Four hydraulic outriggers are available. The maximum weight of the platform is 200 kg. The stainless steel coaming and patterned anti-skid walking platform are available. 2. The worktable is designed with mechanical self-balance, which is used to keep the worktable in balance during operation. The maximum extension angle of the jib reaches 80 °, so as to adjust to the best operation position. 3. Night work light, the operation light can be installed on the operation platform according to the customer's working environment to make night work safer. 4. Computer control, automatic limit, dangerous work alarm, excellent safety performance. The vehicle is equipped with a display to display the working conditions of the whole vehicle in real time. 5. Hexagonal working arm increases strength, synchronous telescopic, compact structure, high working efficiency and wide working range. The telescopic oil cylinder is external and the chain telescopic mechanism makes it easier to observe the fault point and facilitate maintenance. 6. The outrigger adopts the front V and rear H structure, with larger stress surface and higher stability; It can prevent the girder from deformation or fracture. The outriggers can be adjusted independently. Each outrigger can be adjusted independently according to the working ground environment. Even if the ground is uneven, the whole vehicle can be adjusted to a stable state. 7. The four vertical outrigger cylinders and the upper arm, lower arm and lower arm cylinders are equipped with two-way hydraulic locks, whose function is to lock the cylinder after reaching the required position to prevent accidents. The working arm is equipped with a two-way balance valve to make the operation of the working arm more stable. The main components of the vehicle, such as two-way hydraulic lock, two-way lock balance valve, hydraulic flow valve, hydraulic cylinder, emergency pump for engine start and stop, operating system and its control computer, are all domestic well-known brands, and the core components are imported parts. Stable reversing, flexible and convenient operation; The outrigger and working arm are interlocked, safe and reliable to prevent miss operation.

High building moving ladder truck.1. The ladder arm adopts the original Korean Delin ladder arm, and the key components are imported from the original Korean package. 2. Hydraulic telescopic outriggers, the whole vehicle is equipped with four hydraulic horizontal telescopic outriggers, up and down telescopic outriggers, and a total of eight hydraulic cylinders. The H-type hydraulic outrigger has a large span of two horizontal outriggers, which ensures the stability of the ladder arm and can be operated simultaneously or separately. 3. Wireless remote control operation, which can be operated within 80 meters, is convenient to observe the working space, safe and reliable. The remote control and manual operation modes greatly improve the work efficiency. For workers, there is no need to worry about working in the sun. It is more convenient to work. 4. The photoelectric switch with high sensitivity is used with wireless remote control to ensure the accuracy of the elevator arm. The travel of the elevator arm can be flexibly adjusted according to the actual situation of the operation to ensure the stability of the operation. 5. The drag chain is added to the horizontal telescopic tubing to ensure the smooth expansion and service life of the tubing. 6. The original design of the dump hopper has been improved to ensure the portability and flexibility of the product, while maintaining the original cargo weight and increasing the service life of the elevator arm. The size of the dump hopper is 1160x900x370mm, which is mainly used for the up and down transportation of sand and stone materials. After the dump hopper is loaded under the bottom, it is automatically unloaded after it is sent to the set position by remote control, which is convenient, fast, time-saving and labor-saving. 7. Radiator, hydraulic radiator is mainly used to cool the oil in the hydraulic tank. 8. 220V on-board power supply (optional), 220V on-board power supply can be connected to electric operation tools at the work site for convenient operation Elevating platform aerial truck.The elevating platform aerial vehicle is a simple, safe and reliable aerial work vehicle, mainly composed of car chassis and hydraulic elevating platform. The working height is divided into 6 meters, 8 meters, 10 meters and 12 meters, and the load is 250 kilograms. It is applicable to landscaping, pruning branches, street lamp maintenance, etc., and also can be used for the installation, repair, decoration of high-altitude equipment, the up and down transportation of goods in workshops, warehouses and working floors, the production line, the transfer of goods between height differences in the process of goods flow of special equipment, and the loading and unloading of trucks.
Working SiteOur FactoryProducts DisplayCooperative PartnerQualification Certificate Packaging & ShippingCooperative BrandFAQ1.You are factory or trading Company?Yes, we are oversea sales department of Chengli automobile. And you are always welcomed to visit our factory.2.Could your company modify the standard product depends on my request? Yes. Our company is specialized in researching and designing various of special purpose vehicle and spare parts. We can provide any product according to your demand.3. Could your company totally customize products for me?We can provide the customized-designing product meeting with any of your demand.4. Could you provide certification that we need?We can provide various certifications associate with trailer and truck. Such as DOT, ADR, SASO and so on. 5. How long could we receive our goods? It depends on the product that you have ordered. If the goods are prepared, we will deliver your goods as soon as possible.6. How about the after-sale service?We can provide you the technical support to guide you repaire your product. And we will also send original spare parts free of charge by air. If you have special need, we can let our engineer to help you in person